Laser Classification; Electromagnetic Compatibility - Flex ALC 2/1-G Notice D'instruction D'origine

FLEX ALC 2/1-G
Identification on the device
Before switching on the power tool,
read the operating manual!
Laser radiation
Do not stare into beam.
Product of laser class 2; maximum output
power ≤ 1 mW; wave length λ
EN 60825-1:2014

Laser classification

The device complies with laser class 2, based
on the standard IEC 60825-1/EN 60825.
The eye is protected by the lid closure reflex if
somebody accidentally glances into the laser
beam. However, this lid protection reflex may be
impaired by medication, alcohol or drugs.
These devices may be used without further
protective measures if it can be ensured that
no optical instruments reduce the cross-section
of the beam.
Do not aim laser beam at people.
10
520 nm;
=

Electromagnetic compatibility

Even though the device satisfies the strict
requirements of the relevant directives, the
possibility cannot be excluded that the device
– will disrupt other devices (e.g. aircraft
navigation systems) or
– will be disrupted by powerful radiation,
possibly resulting in a wrong operation.
In these cases or other uncertaintities, check
measurements should be carried out.
For your safety
Intended use
This line laser is designed for commercial use
in industry and trade.
The device is designed to determine, transfer
and check horizontal height profiles, vertical
lines, building lines, perpendicular points and
right angles, e.g.:
– to transfer rule and height marks,
– to mark partitions (vertical and/or at right
angles) and
– align equipment and elements in three axes.