Important Safety Information; Symbols On The Power Tool; Laser Classification - Flex ALR 512 Notice D'emploi

Contents

Laser classification . . . . . . . . . . . . . 14

Overview . . . . . . . . . . . . . . . . . . . . 16
Technical specifications . . . . . . . . . 18
Operating instructions . . . . . . . . . . 18
Maintenance and care . . . . . . . . . . 23
Disposal information . . . . . . . . . . . . 23
CE Declaration of Conformity . . . . . 24
Guarantee . . . . . . . . . . . . . . . . . . . 24
Symbols used in this manual
Caution!
Denotes a possibly dangerous situation. Non-
observance of this warning may result in slight
injury or damage to property.
Note
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Disposal information for the old
machine!
(See page 23)
14

Important safety information

Before using the power tool, read and follow:
- these operating instructions,
- the currently valid site rules and the
regulations for the prevention of accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
The power tool may be operated only if it is
- used as intended,
- in perfect working order.
Faults which impair safety must be repaired
immediately.
Laser classification
The power tool conforms to a class 2 laser
based on the standard IEC 825-1/EN 60825
and to a class II product based on
FDA 21 CFR. Eyes must be protected with
the eyelid close reflex in case you acciden-
tally glance into the laser beam. However,
this eyelid protective reflex may be impaired
by medication, alcohol or drugs. These
power tools may be used without other
protective measures. Nevertheless, you
should not look directly into the light source,
just as you would not look directly at the sun.
Do not aim the laser beam at people.
Identification on the power tool
Caution
Laser radiation! Do not stare into the beam.
Output power <1 mW/635-670 nm
Class 2 laser
Rotational laser