Assembly Conditions - Weka 593.4050 Série Notice De Montage, D'utilisation Et D'entretien

the original proof of purchase. Claims must be made in writing, by fax or by e-mail, to us within the specified
period. To ensure that your claim is handled in good time, be sure to provide a detailed, written description of
the damage, accompanied by photos, as well as reasons as to why weka Holzbau GmbH is responsible for
the defect. Damage is fundamentally excluded from the warranty when
- the weka product does not have the correct base (foundation or otherwise),
even if the errors are minor,
- has deviated from the respective assembly instructions,
- wind speeds in excess of force 7, natural catastrophes or other violent events
occur
- the specified load limits (e.g. snow load etc.) have been exceeded,
- any changes (additions or rebuilding) have been made to the product as
compared with the assembly instructions,
- The wood has received insufficient or no care (maintenance: wood protection
agent, wood stain etc.).
A causal association with the damage is not generally required. Colour changes typical of wood, cracking,
warping, shrinkage, swelling or similar normal changes deemed to be natural characteristics of wood, and
their consequences, are expressly excluded from the warranty. Further claims and consequential damage
are not generally covered by the warranty conditions. Components made from materials other than wood
are covered only by the statutory warranty provisions and other statutes; they are not covered by the
warranty.
Damaged or defective parts must be rejected prior to installation or the warranty claim will otherwise
be void.
Varied distortion, swelling and shrinking of the boards and front ends are in the nature of the wood
and do not compromise the functionality of the pool in any way. They are not grounds for complaint.
2.3. Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka
Holzbau GmbH will carry out the following services for you:
Assembly means putting together (installation) of the individual parts supplied. It does not include treating
them with a wood protection agent, the delivery and assembly of accessories and accessory parts.
Electrical connections are not included in the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article
or the individual parts over a distance greater than 5 m or to another level is not included in the assembly
price.
The substrate must be stable, horizontal and level. In the event of doubt, reference should be made to
Technische Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
 Copyright HRB 3662
14