Power Control - asmodus MINIKIN 2 Manuel D'utilisation

Using the Device
48
Checking/setting the resistance
When the unit is unlocked, tap the bottom of the screen (POWER/COIL/TCR/TFR) to enter
the Main Menu. Tap the „RES" submenu to set the resistance of the atomizer head. Tap
„CHECK" to check the current resistance value of the atomizer head. If it is correct, tap
„YES". If it is wrong, tap „NO" to set the correct resistance value. Then, press „+" or „-" to
increase or decrease the value. Press the Fire button to confirm the value and to end the
process.
Note: Make sure that the atomizer head is cold before confirming or setting the resistance
value. Otherwise, the device may not work, or at least improperly.

Power Control

When the screen is unlocked, tap the currently displayed power value in watts to change the
value. Then, press „+" or „-" to increase or decrease the value. Press the Fire button to end
the process.