Unlocking The Screen; Selecting The Operation Mode - asmodus MINIKIN 2 Manuel D'utilisation

Using the Device
45
Vaping
While holding the fire button of the device, inhale the vapor slowly and continuously through the mouthpiece of
your e-cigarette. Release the fire button while exhaling the steam.
Note: If the fire button is pressed for more than 10 seconds, the unit will no longer power on for safety reasons.

Unlocking the Screen

When the unit is in standby mode with the screen turned off, press the Fire button. Your current
Vaping settings are displayed on the screen. To go to the Main Menu, swipe along the screen in
the direction of the arrow, and then tap the lower part of the screen where the current operation
mode is displayed. (POWER/COIL/TCR/TFR)

Selecting the Operation Mode

When the unit is unlocked, tap the bottom of the screen (POWER/COIL/
TCR/TFR) to enter the Main Menu. Tap the „MODE" submenu to select
the operating mode from among PWR, COIL, TCR and TFR.