Donner MAMP5 Manuel De L'utilisateur page 8

System sound field positioning
Left channel speakers
L
Right channel speakers
R
Speaker output connections
Product:
Model:
Peak power:
Frequency response:
Input: AC~115/ 60Hz
Please use a short regular speaker cable to connect the speaker output and the input of each speaker.
If not properly connected, the speaker will not sound. Please make sure that the "+" wire of the amplifier
is connected to the "+" terminal of the speaker, and the "-" wire of the amplifier is connected to the "-"
terminal of the speaker. If reversed, the sound will be unnatural and there will be no low-frequency.
L
L
Amplifier
MAMP5
440W
20Hz-20KHz
-230V/50
Hz
Connection of speaker cable
1: First, The speaker cable
shall be reserved with copper
wire of at least 6 mm long.
6 mm
R
R
AUDIO OUTPUT AUDIO OUTPUT
CH.D CH.C CH.B
CH.D CH.C CH.B
2: Then insert all the copper
wires into the connector.
6.EN
English
CH.A
POWER INPUT
AC115V/60Hz 6A
AC230V/50Hz 4A
CH.A