Donner MAMP5 Manuel De L'utilisateur page 7

Functions of remote control
When the panel input knob is adjusted to BT/FM/
USB/SD, the remote control function will work.
1
The power key:
Press this button to switch on/off in USB/FM/BT
mode.
Display shows "USB" when switched on
No display when switched off
Repeat key:
Press this key to play songs repeatedly in USB/SD
mode.
When a single song is played repeatedly, the
display shows "One"
When all songs are played repeatedly, the
display shows "All".
MODE key:
Press the "MODE" key to change the input
→ →
mode (Bt USB FM
Display of screen
2
CH- key:
Press this key in FM mode to switch to the previous
channel.
The display shows the previous channel.
CH+ key:
Press this key in FM mode to switch to the next
channel.
The display shows the next channel.
1
2
3
4
)
→ →
EQ key:
Press this key USB / BT / FM mode to play 5 equalizer
effects in a cycle.
The display shows the EQ key:
Previous song key:
Previous song in USB, BT mode.
The display shows the previous song:
Next song key:
Next song in USB, BT mode.
The display shows the next song:
PLAY / PAUSE key:
In USB or BT mode, press this key once to pause the
playback, and press it again to resume the playback.
When playing, the display will show:
When pausing, the display will show:
Press this key in FM mode to search channels
automatically.
The frequency of the channel will be displayed when
searching:
3
Volume down key:
In USB/FM/BT mode,press this key to reduce the volume.
When the volume decreases,the display will show:
Volume up key:
In USB/FM/BT mode,press this key to increase the
volume.
When the volume increases,the display will show:
4
Number key:
In USB, SD mode, press this key to select the song.
At this time the display screen will display the number
pressed:
Press this key in FM mode to select the channel.
At this time the display screen will display the number
pressed:
Remote control:
1. The remote control can work within 6 meters and 30
degrees of the receiver.
2. Make sure there are no other machine between the
remote control and the receiver.
3. Keep the remote control away from the light. Strong
light reduces its performance.
4: The remote control can only control the functions in
MP3 / BT / FM mode. It can't control the external
voice input of RCA Jack / the adjustment of treble
and bass / microphone.
5.EN
English