Unold 87850 Mode D'emploi page 27

Copyright UNOLD AG | www.unold.de
Cleaning the shaving head
5. From the blade side, carefully press the shaving head
to the rear. Attention, he blades are sharp – danger
of injury!
6. Clean the shaving head and the interior of the appli-
ance with a soft brush.
7. Regularly apply 1 or 2 drops of acid-free oil on the
shaving head.
8. Do not knock on the shaving head, this can damage
the shaving head.
9. Place the tab on the bottom of the shaving head in
the interior of the appliance and firmly press the
shaving head onto the appliance. Ensure that the
shaving head properly locks in place before reusing
the appliance.
Stand 24.3.2020 27 von 76