Stiebel Eltron DNM 3 Utilisation Et Installation page 32

INsTALLATIoN
Installation

f Undo the cover fixing screws by two turns. f
f Undo the snap fastener using a screwdriver. f
f Remove the appliance cover with the heater towards the f
front.
32 | DNM


f Using pliers, break out the knock-out for the power cable
f Use the appliance back panel as a drilling template.
f Secure the appliance back panel to the wall with suitable

f
in the appliance cover. Correct the contours with a file if
necessary.
f
f
rawl plugs and screws.

www.stiebel-eltron.com