Disc; Usb Devices - Yamaha CRX-N560 Mode D'emploi

Troubleshooting
Problem
The iPod does not charge up.

Disc

Problem
Playback does not start after a disc is set.
Some button operations do not work.
Playback does not start immediately after
pressing on the unit or on
the remote control (stops immediately).

USB devices

Problem
The unit does not detect the USB device.
Folders and files in the USB device cannot
be viewed.
40
En
Cause
The iPod is not connected properly.
The iPod is not supported by this unit.
The unit is in the eco standby mode.
Cause
The disc set into the unit may not be compatible.
The disc may be dirty.
The disc set in the unit may not be supported.
If the unit was moved from a cold to warm place, condensation may have
formed on the disc reading lens.
Cause
The USB device is not connected to the USB jack securely.
The file system of the USB device is not FAT16 or FAT32.
The data in the USB device is protected by the encryption.
Solution
Reconnect the iPod to the USB jack ( P.15).
Use a supported iPod ( P.43).
Set [Power Saving] to [Normal] with the option setting (
Solution
Use a disc supported by the unit ( P.43).
Wipe the disc clean ( P.43).
Use the disc supported by the unit ( P.43).
Wait for an hour or two until the unit adjusts to the room temperature, and
try again.
Solution
Turn off the unit, reconnect your USB device, and turn the unit on again
( P.15).
Use a USB device with FAT16 or FAT32 format.
Use a USB device without an encryption function.
P.12).