Sleep Timer - Yamaha CRX-N560 Mode D'emploi

• When the setting completes, [Completed!] is
shown and lights up on the front panel
display.
3
Press .
• The unit enters the standby mode and the beep
sounds at the time you set.
• If you wish to play back music at the time you set,
select an audio source and play it back before
pressing in this step. See (*) at the bottom of
tips on the right for details on audio source
playback.

Sleep timer

You can set the time to elapse which the unit
automatically enters to standby mode.
Press several times to select the time.
• Time can be selected from 30/60/90/120 min., or OFF.
•
lights up shortly after the time is selected, and the
sleep timer is set.
• To cancel the sleep timer, press
again.
3
A
TIMER
SLEEP
Using the clock
• If the source is removed from the unit after the
wake-up timer is set, the unit will beep at the start-
up time.
• If any music source is played back at the start-up
time, flashes and playback will continue.
• After setting the wake-up timer, you can enable or
disable it by pressing the TIMER button when the
unit is on.
• To stop the beep, press
or A; otherwise, it will
stop after 60 minutes.
* When the music source is set to AUX, Server,
DIGITAL IN, or AirPlay, the unit beeps at the start-
up time.
33
En