Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENERGY MOVIER: INSTALLATION
≥
With Energy Movier software tool you can easily convert your AVI/WMV/MPG/
VOB/ASF videos to the AVI format (XVID with MP2 audio) so you can enjoy them
with your MP4 Energy™.
For installing Energy Movier follow these steps:
1.
Connect your MP4 Energy™ to your PC with the included USB cable. NOTE: The
latest available version of the software is saved in the memory when the unit
leaves the factory. However, if you have an internet connection, we recommend
you to always download the latest version from our website www.energysistem.
com/videosweb.
2.
A Windows menu will appear automatically for you to choose an option (as long
as you have Windows autorun enabled). Select "Energy Sistem Menu"
3.
Once you see the Energy Sistem menu, select "Install Energy Movier". If you have
autorun disabled, you can run the installation file "setup.exe" from the folder
"SOFTWARE/Energy Movier".
4.
On the installation screen, select "OK" and click on the icon to begin the
installation. Follow the steps by pressing "Continue".
Note: Depending on the codecs you have installed in your computer, you might
get a message of the program trying to overwrite some of them. In that case, we
recommend that you keep your existing files by pressing "Yes".
5.
Once the installation is complete, you can run the application from Start -> "All
programs" -> "Energy Sistem" -> "Energy Movier".
54
Publicité
Table des Matières
