H+H BS 38 Mode D'emploi page 11

Set de thermomètres
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
1.
Open the battery cover, the cover at the top of the thermometer.
2.
Remove the old battery.
3.
Insert a new battery and replace the battery cover.
SPECIFIC ATIONS
Measuring range:
Measuring time:
Accuracy:
Display:
Battery:
Power
Dimensions:
Battery life:
Weight:
THE PACIFIER THERMOMETER
The most convenient way to measure your baby's temperature is with the thermometer desi-
gned as a pacifier.
Note: Oral (mouth) measurements are often about 0.5 °C or 1.0 °F lower than
body temperature readings (rectal measurement).
USING THE PACIFIER THERMOMETER
1.
Remove the protection cap from the pacifier.
2.
Press the On/Off button. „188.8E," appears in the display, confirming that the thermometer is
working.
3.
Insert the pacifier in the baby's mouth.
The measurement starts when the screen displays „Lo °C" or „Lo °F". During measurement,
the symbol „°C" or"°F" will flash while the temperature increases. When a maximum value
is reached (after approx. 3 minutes', the symbol „°C" or „°F" ceases to flash. A buzzing sound
indicates that the measurement is finished.
Note: It is recommended to leave the pacifier thermometer in the baby's
mouth for 6-8 minutes to allow the pacifier to warm up and to obtain a more
accurate measurement.
- When the display reads „Lo °C" or „Lo °F", the measured temperature is below 32.0°C/ 90 °F
- When the display reads „Hi °C" or „Hi °F", the measured temperature is above 43.0°C/ 109.9 °F
Note: Drinking or eating prior to use may affect the temperature reading.
Wait half an hour before taking a measurement.
4. Press the On/Off button to switch the pacifier thermometer off.
Note: The thermometer switches off automatically after 10 minutes.
Switch the thermometer off directly after use to prolong battery life.
32.0°C — 42.9°C (89.6°F — 109.2°F)
approx. 3 — 5 minute
± 0.1°C (±0.2°C) for 35.0 — 42.0°C (95°F — 107.6°F) and ±0.2°C (±0.4°F)
for remaining range at an ambient temperature of 22°C (71.6°F)
LCD (display measuring unit: 0.1°C / 0.1°F)
1.5VDC (LR41) alkaline
consumption: 0.15 mW
129mm(L) x 21mm(W) x 12.5mm(H)
approx. 250 hours or 1000 applications
approx. 12 g. (with battery)
11

Publicité

Table des Matières
loading

Produits Connexes pour H+H BS 38

Ce manuel est également adapté pour:

40016

Table des Matières