TrekStor i.Beat emo Notice D'utilisation page 10

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
OPERATING INSTRUCTIONS
Note: Please charge the i.Beat emo as described in these operating instructions for at least 3 to 4 hours before
initial use.
EN
1) Controls for the TrekStor
Note: To reset, carefully press the
button is recessed deeply in the housing.
2) Connecting the TrekStor
Note for Windows® 98 users: First install the drivers from the accompanying CD before connecting the i.Beat emo
to your PC.
Use the included USB cable to connect the i.Beat emo to a USB port in your PC. Your operating system will
automatically recognize the i.Beat emo and will add a "d
3) Load the TrekStor
The i.Beat emo starts charging as soon as you connect it to a PC. The battery is charged after a maximum
of three to four hours; charging automatically stops to prevent overcharging.
Note: The maximum battery life is reached only after approximately 10 charging cycles.
4) Exchanging data with the TrekStor
Files that are not copy-protected
a) Select the desired files (such as MP3) with the mouse. Copy these files by clicking them with your right
mouse button ("c
b) Under "m
y
c) Click it with your right mouse button, and select "p
will be available on the i.Beat emo.
i.Beat emo
button with a pointed object (such as an unbent paperclip). The reset
y
i.Beat emo
i.Beat emo
").
opy
c
", select the device with removable storage "t
omputer
A)
Headphone jack
B)
Loop for neck strap
C)
USB port
D)
CSTN Display
E)
switch (key lock)
q
F)
Microphone
G)
button
E
H)
button
;
I)
button (Play / Pause)
X
J)
button
F
K)
button
,
L)
button
5
M)
/
button
/
B
N)
button
y
to a PC
r
eVice With
emoVAble
i.Beat emo
s
reK
" to start copying. After copying is over, the data
Aste
– 10 –
s
" under "m
c
torAge
y
.b
".
tor i
eAt emo
".
omputer

Publicité

Table des Matières
loading

Table des Matières