Kenwood KS-2200HT Mode D'emploi page 5

Connections
The speaker wires and labels of speakers' back panel are color-coded to facilitate connection. Connect each wire to the matching-
colored terminal, as shown in the figure.
Be sure to turn off your amplifier before connecting or disconnecting speakers.
1. Twist wire's
conductor
Subwoofer (option)
R
1. The speaker system's peak input power is indicated in the specifications. To avoid speaker damage, never run the
speakers at power levels exceeding this limit.
2. This speaker system has a nominal impedance of 8 ohms. To ensure safe and reliable operation, be sure that your
amplifier or receiver is able to work with 8-ohm speakers.
• Never short the (+) and (–) speaker wires together.
• Do not reverse L and R or (+) and (–) connections. Reversal of sides or polarities may result in unnatural, incorrectly positioned
sound.
2. Push
Right
(–)
L C R
SURR
FRONT
SPEAKERS
L
R
Speaker terminals
(Amplifier or receiver)
SUB SUB
WOOFER WOOFER
3. Insert the
conductor
Front speakers
Center speaker
(+) (–)
Red
L
4. Release
Left
➤
(+) (–)
Green
Right Left
Surround
speakers
(–)
(+)
(–)
Gray
(+)
White
(+)
Blue
5
EN