Specifications - PSB Speakers PSB SubSeries 500 Guide D'utilisation

XI. Specifications
FREQUENCY RANGE
Response ± 3dB
LF Cutoff 10dB
AMPLIFIER POWER - INTERNAL
Continuous
Dynamic
Dynamic Peak
Type
ACOUSTIC DESIGN
Woofer (Nominal)
Crossover
Internal Volume
Design Type
SIZE
WEIGHT
Net
Shipping
FINISH
FEATURES
POWER
Input
Fuse
All specifications are subject to change without notice. PSB, PSB Speakers, and SubSeries are
trademarks of, or used under license by, PSB Speakers, a division of Lenbrook Industries Limited.
© 2008 PSB All other trademarks used herein are trademarks of their respective owners. All rights
reserved.
SubSeries 500
(Anechoic Chamber)
25-150Hz
22Hz
500W
750W
1500W
Class H
Discrete MOSFET Output Devices
12" (300mm)
Woven Fiberglass Cone
Rubber Surround
2" (50mm) Voice Coil
80oz (2268g) Magnet
Cast Basket
Variable 50Hz-150Hz
Low Pass Filter
24dB/octave Linkwitz-Riley
3
2.34 ft (66 liter)
Bass Reflex
2 x 2 3/4" (70mm) Down Firing Port
Radiussed Externally and Internally
W x H x D
15 3/8" x 23 3/16" x 21 1/16"
391mm x 589mm x 535mm
71.6 lb (32.5 kg)/each
82.6 lb (37.5 kg)/each
Black Ash or Cherry Wood Veneer
Front-Mounted Volume, Crossover, and Continuous
Variable Phase Controls and Power LED
Auto On/Off, LFE In/Out, LL Stereo In-Out
HL Stereo In, 12V Trigger
RCA Inputs/Outputs
High/Speaker Level Gold-plated
5-way Binding Post Inputs
Vibration Absorbing Feet
120V, 60HZ 220-240V, 50/60HZ
T 6.3AL, 250V T 3.15A, 250V
23