Cutting Parameters - AXXAIR 121ECO1 Mode D'emploi

9.

Cutting parameters:

A CC type cutting machine, having the
correct cutting parameters and the proper
saw blade, guarantees a quality cut.
There are two cutting parameters.
The rotation speed of the cutting tool
-
(RPM), expressed as revolutions per
minute.
- The speed with which the tool advances
(A), expressed in meters per minute.
RPM can be regulated with the variable speed
control on the electric cutting motors. Consult
the table on page 3.
Rotation Speed RPM:
The rotation speed RPM is found using the
formula:
RPM = (1000 x Vc) / (3.14 x D)
Vc = the tool's cutting speed in m/min
D = the tool's diameter in mm
Hardness of the material
in kg/mm²
From 0 to 50 (carbon steel)
From 50 to 110
(carbon/stainless steel)
Over 110 (Stainless steel)
For our application, the speed ranges used
are:
0 to 50
Cutting
kg/mm²
tool
Rotation speed in rot/min
LS63128
125 to
LS63100
180
LS6364
LS6872 120 to
LS6844 165
LS8080
100 to
LS8054
140
LS8034
LS9038 90 to 125
For the motor's rotation speed refer to page 3.
ENGLISH
Vc in m/min
From 25 to 35
From 18 to 25
From 12 to 18
50 to 110 > 110
kg/mm² kg/mm²
90 to 125 60 to 90
85 to 120 55 to 85
70 to 90 45 to 70
65 to 90 40 to 65
F-26800 ETOILE-SUR-RHONE
- 14 -
Z.I. Les Bosses
www.axxair.com