Contents; Declaration Of Conformity; Machine Usage; Receiving The Machine - AXXAIR 121ECO1 Mode D'emploi

Contents:

Safety instructions : ....................................... 11
Contents: ....................................................... 12
1. Declaration of Conformity: .................... 12
2. Machine usage: ..................................... 12
3. Receiving the machine: ........................ 12
4. Handling the machines: ........................ 12
5. Mounting on a workbench: .................... 12
6. Cutting tools: ......................................... 13
7. Installing the tool on the motor: ............. 13
8. Installing the motor on the machine: ..... 13
9. Cutting parameters: .............................. 14
10. The tube's fastening: ........................ 15
11. Additional clamping jaws: ................. 15
12. Penetration adjustments: .................. 16
13. Cutting step by step: ......................... 16
14. Lubricants: ........................................ 17
15. Maintenance and Repairs: ............... 17
16. Environmental protection .................. 17
1.

Declaration of Conformity:

We declare under our own responsibility that
this product conforms to the norms and
guidelines indicated on page 2.
2.

Machine usage:

This machine is the ideal answer for optimal
preparation of welded tubes and other types of
assemblies in the
pharmaceutical, chemical fields, etc.
This procedure provides a rake face with a
surface in a very good state and with very
limited burring. The perpendicularity between
the sheered surface and the tube is just tenths
of a millimetre.
With a blade in good condition and adequate
cutting parameters, the cut is considered to be
without burrs.
3.

Receiving the machine:

Machines are delivered in transport cases as
specified in norm NIMP15. In the case you will
find the machine bolted down and a bag
containing the cutter's
necessary accessories for using the machine.
ENGLISH
food industry,
motor with the
- 12 -
F-26800 ETOILE-SUR-RHONE
4.

Handling the machines:

Turn back the clamping jaws to their full extent.
Sling the machine by its central opening in
order to balance it.
Machines weighs is situate between 36 and
42kg so handling requires the usual care and
equipment.
5.

Mounting on a workbench:

The cutting machine can be installed and
bolted on a workbench. Attention should be
paid to the stability of the assembly (cutting
machine + workbench + the tube to be cut),
and also to the load that can be supported by
the workbench.
Weight of the tubes
Material Ext Ø
Steel/Stainless 26.7 mm
Steel/Stainless 42.2 mm
Steel/Stainless 76.1 mm
Steel/Stainless 121 mm
Foot supports can be supplied as an option.
Z.I. Les Bosses
www.axxair.com
Thickness Weight
/ m
1 mm 0.7 kg
5 mm 4.6 kg
7 mm 11.9 kg
7 mm 19.7 kg