ADEO SCREEN CINEMA CURVED Manuel D'installation page 23

FRAME ASSEMBLY SCREEN
5
Assembly the vertical profiles.
1- Take the vertical profiles and place them close to each other.
2- Fix together the screws and the nuts, don't fasten them completely.
3- Insert the heads of the screws in the profile grooves and then fasten them completely.
1- Insert the other screws on the corners without fastening them completely. Then fix each corner by inserting the
heads of screws into the profile groove like image below.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: CINEMA CURVED Installation Manual rev2 |08.06.2017
Please verify that you are working with the latest revision of this document before specifying your screen.
Page 23