Screen Research PFIXFI3-XXXXX Manuel D'installation page 23

Manual
3
Place the screen frame face up, attach the angled screen wall brackets to the two inner
corners of the horizontal profiles.
4
This instructions apply to screen widths greater than 2500 mm and less than 4000 mm,
This applies to non acoustic material (only)!
a- Positions and attachments points of upper and lower stiffener brackets at the center of two
horizontal frame brackets.
b- Position the vertical stiffener into the upper and lower stiffener brackets.
c- Insert screw into non threaded stiffener bracket holes and tighten screw.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: FI3 – Installation Manual rev4 | 01.01.2018
INSTRUCTION FOR ASSEMBLY THE SCREEN
Page 23