Screen Research PFIXFI3-XXXXX Manuel D'installation page 20

Manual
1
Screen component picture and parts list:
Width of the screen <=2500 mm
n° 1 Manual
n° 4 Aluminium profiles FRAMELESS
n° 8 Iron corners (profiles grooves)
n° 32 Set screws M6
n° 2 Wall brackets (internal profile)
n° 8 Screws with round head M5
n° 4 Round bars
n° X Springs (depends on the sizes)
(screws and plugs for wall mount are not included)
2
The screen assembly process will require two individuals. Please perform the assembly
process using the previously provided plastic sheeting.
2 c
Insert the corners into the grooves of the vertical
frame profiles.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: FI3 – Installation Manual rev4 | 01.01.2018
Width of the screen >2500 mm<=4000
Extra for Screens >2500 mm<=4000 mm
n° 1 Rectangular tube (30x15mm)
ACOUSTICALLY TRANSPARENT
n° 2 Brackets for stiffener
n° 2 Screws with round head M5
n° 2 Screws with round head for Aluminium M5
(screws and plugs for wall mount are not included)
x 4
INSTRUCTION FOR ASSEMBLY THE SCREEN
Width of the screen >4000
Extra for Screens >4000mm
n° 1 Rectangular tube (30x60mm)
-2 for
n° 2 Brackets for stiffener
n° 6 Screws with round head M5
n° 6 Square nuts
n° 2 Screws with round head for Aluminium M5
(screws and plugs for wall mount are not included)
2 a X 4
Insert the corners into the grooves of the vertical
frame profiles.
2 b X 4
Attach the vertical and horizontal frame profiles
together by inserting the corners into the profiles
grooves.
2 d x 4
ATTENTION!
The corners
of the
assembled
profiles
need to be
gapless.
Page 20