ADEO SCREEN ELEGANCE Manuel D'installation Et D'utilisation page 16

ENGLISH – Rolling screen installation and operation manual
A – Left Motor
PROGRAMMING END STOPS MOTOR SOMFY RTS 230V 50Hz/120V 60Hz (procedures already carried out in factory, SHOULD NOT be performed by unauthorised personnel)
Move the
screen surface
to down limit
switch.
Move the
screen surface
to up limit
switch.
PROGRAMMING END STOPS MOTOR SOMFY IO-homecontrol 230V 50Hz/120V 60Hz (procedures already carried out in factory, SHOULD NOT be performed by unauthorised
1.
Move the
screen surface
to
intermediate
height.
1.
Move the
screen surface
to
intermediate
height.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: ELEGANCE Installation Manual rev4 | 07.01.2021
Please verify that you are working with the latest revision of this document before specifying your screen.
10 END STOP NICE MOTOR ADJUSTMENT (ONLY FOR MOTOR 120V)
1 Press both
and
same time until you will see
a brief up and down motion
of screen surface.
1. Press both
and
same time until you will see
a brief up and down motion
of screen surface.
Press both
Λ
V
and
time until you will see a
brief up and down motion
of screen surface.
Press both
Λ
V
and
time until you will see a
brief up and down motion
of screen surface.
Back fall - C
Frontal fall - D
Down limit switch
2
Move the screen with
at the
to reach the desired
down limit position.
Up limit swicht
2
Move the screen with
at the
to reach the desired up
personnel)
Down limit switch
2.
Move the screen with
at the same
to reach the desired
down limit position.
Up limit swicht
2.
Move the screen with
at the same
to reach the desired up
B – Right Motor (standard)
3
4
buttons
Press button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
3
4
buttons
Press button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
limit position.
3.
4..
my
buttons Press button until you
Λ will see a brief up and down
V
and
motion of screen surface to
memorize the new position
3.
4.
my
buttons Press button until you
Λ
will see a brief up and down
V
and
motion of screen surface to
memorize the new position
limit position.
Page 16