Recommended Measures To Secure The Tv - Sony BRAVIA KDL-65W950B Mode D'emploi

Recommended Measures
to Secure the TV
Consider the following measures when
securing your TV to a Stand (not supplied).
1
Secure the Stand for the TV.
Make sure the Stand can adequately
support the weight of the TV. Use two
angle braces (not supplied) to secure
the stand. For each angle brace use the
appropriate hardware to:
• Attach one side of the angle brace to
the wall stud.
• Attach the other side to the Stand.
2
Secure the TV to the Stand.
Use the optional hardware listed as
follows (not supplied):
• M4 machine screw (screwed into the
TV's rear cover)
• A screw or similar (attach it to the
Stand)
• Rope or chain (strong enough to
support the weight of the TV). Make
sure that there is no excess slack in
the rope or chain.
Screw
(not supplied)
Angle brace
(not supplied)
Stand
Screw hole on the
rear cover
M4
machine
screw
(not
Rope or supplied)
chain
(not
supplied)
The length of the M4 machine screw
differs depending on the rope or chain
diameter. Please see below illustration.
6-8 mm
Screw M4
Rope or chain
TV's rear cover
3
Anchor the TV to the wall by using bolts,
wall anchor and chain (or rope).
Anchor bolts (M6) (not supplied)
Wall-
mount
holes
(Continued)
US
Rope or
chain (not
supplied)
Wall-anchor
(not
supplied)
19
US