Loading The Paper; Sp317 - Star SP317 Guide D'utilisation

2-1. SP317

Fig. 2-1 Removing the rear cover
(SP317)
Fig. 2-2 Mounting the roll paper holders
(SP317)

2. LOADING THE PAPER

1 Turn the power switch on the printer
2 Set DIP switch 2-4 to match the
(All the switches in the DIP switch
array are factory preset to the "ON"
position.)
3 To remove the rear cover lift it up
4 Dependant on the width of the paper
– 5 –
to the off position.
width of the paper that is being used.
(Refer to Installation Manual for
DIP switch settings.)
DIP
ON
switches
3.25 inches
2-4
3.0 inches
approx. 3cm and push it backwards.
(2.25 or 3 inches), align the roll
paper holders at the specified posi-
tion .
OFF
2.25 inches