Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CHAPTER -3: USING YOUR FRIDGE FREEZER
Screen Saver Mode
Purpose
This mode saves energy by switching off all control panel lighting when the panel is left inactive.
How to Use
• Screen saver mode will be activated automatically after
30 seconds.
• If you press any key while the lighting of the control panel
is off, the current machine settings will reappear on the
display to let you make any change you wish.
• If you do not cancel the screen saving mode or press any
key for 30 seconds, control panel will remain off.
To deactivate the screen saving mode,
• To cancel the screen saving mode, first of all, you need to press any key to activate the keys and then press
and hold the Mode button "
• To reactivate screen saving mode,
The Child Lock Function
Purpose
Child lock can be activated to prevent any accidental or
unintentional changes being made to the appliance settings.
Activating Child Lock
Press and hold child lock button
Cancelling Child Lock
Press and child lock button
Door Open Alarm Function
If either the fridge or freezer door is left open for more than 2 minutes, the appliance will beep.
Temperature Settings
Freezer Temperature Settings
• Press
icon (#9 on control panel diagram), until the
'Freezer temperature setting' is selected (#1).
• Once Freezer temperature setting is selected, the
temperature will flash.
• Users can then use the up or down arrow (
set the temperature
Freeze Mode).
• If Super Freeze mode or Eco mode is activated, the
temperature will not change until the mode is cancelled.
Cooler Temperature Settings
• Press
icon (#9 on control panel diagram), until the 'Fridge temperature setting' is selected (#1).
• Once Fridge temperature setting is selected, the temperature will flash.
• Users can then use the up or down arrow (
Mode).
• If Super Freeze mode or Eco mode is activated, the temperature will not change until the mode is cancelled.
Warnings About Temperature Adjustments
• It is not recommended that you operate your fridge in environments colder than 10°C.
• Temperature adjustments should be made according to the frequency of door openings, the quantity of food
kept inside the fridge and ambient temperature of the placement of your fridge.
• Your fridge should be operated up to 24 hours according to the ambient temperature without interruption after
being plugged in, this is so it is completely cooled. Do not open the doors of your fridge and do not place food
inside it during this period.
• A 5 minute delay function is applied to prevent damage to the compressor of your fridge, when you take the
plug out and then plug it back in again after an energy breakdown has occurred. Your fridge will start to operate
normally after 5 minutes.
"
(#12) for 3 seconds.
press and hold the mode button "
(#13) for 5 seconds.
(#13) for 5 seconds.
(-16, -18, -20, -22, -24°C and Super
/
) to
/
) to set the temperature
EN -11-
"
(#12) for 3 seconds.
(8, 6, 5, 4, 2°C and Super Cool
Publicité
Table des Matières
