Description - Echo PB-265ESLT Manuel D'utilisation

1. Spark plug Provides spark to ignite fuel mixture.
2. Spark arrestor - Catalytic silencer / Silencer The silenc-
er or catalytic silencer controls exhaust noise and emis-
sion. The spark arrestor screen prevents hot, glowing
particles of carbon from leaving the silencer. Keep ex-
haust area clear of flammable debris.
3. Serial number label Lists model number and serial num-
ber of unit.
4. Starter handle The grip of the starter, for starting the en-
gine. ("ES" START)
5. Fuel tank cap Covers and seals fuel tank.
6. Fuel tank Contains fuel and fuel filter.
7. Air cleaner Contains replaceable air filter element.
8. Choke Choke is located on the side of the air cleaner.
Move choke lever to
starting. Move choke lever to
choke.
position to close choke for cold
position to open

Description

9. Purge bulb Pumping purge bulb before starting engine
draws fresh fuel from the fuel tank, purging air from the
carburettor. Pump purge bulb until fuel is visible and
flows freely in the clear fuel tank return line. Pump purge
bulb an additional 4 or 5 times.
10. Shoulder harness Used to support unit on operator's
back. The straps are adjustable.
11. Handle Used by operator to direct air flow.
12. Ignition switch "SLIDE SWITCH" mounted on top of the
throttle assembly. Push forward to start and run. Slide
back to stop.
13. Throttle trigger Spring loaded to return to idle when re-
leased. During acceleration, press trigger gradually for
best operating technique.
14. Throttle position lever (Throttle setting device) Pull
back to increase engine speed.
15. Blower pipes Exclusive positive locking system.
16. Flexible pipe Allows for full range of movement.
13
Description