Turning On The Power - Olympus CAMEDIA D-340R Mode D'emploi

Control panel
Écran de commande
Panel de control
LCD monitor
Écran ACL
Monitor LCD
56
Slide open the lens barrier.
Faire coulisser le capot de
protection de l'objectif.
Deslice el cubreobjetivo
para abrirlo.
Viewfinder
Viseur
Visor
Condition indicator
LED
Indicateur d'état
LED indicador de
estado
E

TURNING ON THE POWER

To turn on the power, just slide open the lens barrier on the
front of the camera. When it is turned on, it automatically
checks the SmartMedia card. If there is a problem with the
card, the camera emits a beep sound and displays the
following:
When there is no SmartMedia card in the camera / the
card is protected...
the Card error indicator on the control panel and the Condition
indicator LED will blink.
When the card needs to be formatted...
the LCD monitor is turned on and the Card error indicator
lights on the control panel.
Olympus brand cards are recommended (already
formatted). Non-Olympus brand cards must be formatted
by the camera.