Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8-14
Erasing Voice memos
1
Press MENU/MEMO button in the standby mode.
2
Select the memo that you want to erase with CALL
button. Each time CALL button is pressed, the cursor
switches between A, B, and C.
02 DEC 18:45
02 DEC 18:47
02 DEC 18:48
SELECT
PLAY
REC
8-15
If optional units are installed
1
When a sensor is activated or a call button is pressed, the
notification sound goes off and the transmit LED (red) flashes.
A warning screen is displayed on the video monitor.
NOTES: 1. The notification sound time is set in the EXTERNAL SENSOR INPUT. (Refer to section 7-9)
The factory setting is
2. When the EXTERNAL SENSOR INPUT is set to
notification sound.)
3. If a call is received from an entrance during the notification, the unit switches to the entrance call (communication is prioritized). However,
when the EXTERNAL SENSOR INPUT is set to
4. When the EXTERNAL SENSOR INPUT is set to
5. When the EXTERNAL SENSOR INPUT is set to
warning screen ends after approx. 1 minute.
9
TECHNICAL PRECAUTIONS
• Operating temperature: 0 °C to 40 °C (+32 °F to +104 °F)
• The video image may distort slightly during activation of
door release. But this is not a unit malfunction.
10
SPECIFICATIONS
• Power:
DC 18 V (JF-2MED, JF-2HD)
• Current consumption: (Max.) 400 mA (JF-2MED)
(Max.) 220 mA (JF-2HD)
• Calling:
Chime and image, approx. 45 seconds
• Communication:
(HANDS-FREE mode) Approx. 60 seconds
(PTT mode) Press-to-talk, release to listen, approx. 60 seconds
• Video monitor:
3-1/2" direct view TFT color LCD
• Scanning lines:
525 lines
• Door release contact: AC/DC 24 V, 0.5 A (N/O dry closure contact L, L)
(Aiphone's EL-9S is recommended.)
• Dimensions:
179 (H) x 135 (W) x 32 (D) (mm)
7" H x 5-5/16" W x 1-1/4" D
• Weight:
440 g (0.97 lbs.) approx. (JF-2MED)
420 g (0.93 lbs.) approx. (JF-2HD)
JF-2MED
ERACE
.
, the notification continues to sound even if there is a call from an entrance.
3
Press MENU/MEMO button.
02 DEC 18:45
02 DEC 18:47
02 DEC 18:48
SELECT
PLAY
4
Press CALL button to erase. Press PLAY button to stop the
erasure and return to the Voice memo selection screen.
Once a Voice memo is erased, it cannot be restored.
02 DEC 18:45
02 DEC 18:47
02 DEC 18:48
DO YOU WANT TO ERASE MEMO?
5
Press TALK button to return to the standby mode.
2
Press TALK button to stop the notification sound.
The notification sound volume is linked with "Chime tone volume
control". When the chime tone volume control is turned "Off", the
notification sound does not go off. However, when the EXTERNAL
SENSOR INPUT is set to
equivalent to "High" (fixed).
, door station 1 also emits a notification sound. (Door station 2 does not go off a
, there is automatic restoration after 30 seconds.
or
, the notification sound operates continuously until reset, however a
• Cleaning: Clean the units with a soft cloth dampened with a neutral
household cleanser. Do not use any abrasive cleaner or cloth.
• If there is a system malfunction, turn the Power switch at the monitor
station OFF and back ON again. If this does not solve the problem, unplug
the DC power supply and contact a qualified technician for service.
- 15 -
REC
ERACE
, JF-2MED sounds at a volume
Publicité
Table des Matières
