Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Changing the Menu Settings (Continued)
( AUTO POWER OFF
If the camera is not operated for
5 minutes while the power is on,
it turns itself off automatically to
conserve power.

4 COLOR MODE

Adjusts the color tone of images
when recording.
) CLEAN-UP HDD
Writing speed to HDD tends to
become slow after long periods
of repeated use. Execute cleanup
periodically to regain the writing
speed.
* FORMAT HDD
This will ensure stable speeds
and operation when accessing
the hard disk drive.
+ DELETE DATA ON HDD
This will make it more diffi cult to
recover data on the HDD which
has already been erased. It is
recommended that you do this
when disposing of the camera
to prevent illegal data recovery
(using commercially available
software).
, FORMAT SD CARD
You have to format newly
purchased SD cards with this
camera before using them.
This will also ensure stable
speeds and operation when
accessing the SD card.
- VIDEO NO. RESET
. IMAGE NO. RESET
By resetting the fi le number
(name), a new folder will be
made. The new fi les you are
going to make will be stored in
the new folder.
It is convenient to separate
the new fi les from previously
recorded fi les.
50
Menus
Settings: [ ] = Factory-preset
OFF : Disables the function.
[ON] : Activates the function.
To turn the camera on again, set the power/mode
switch to OFF, then to ON when using the battery pack.
When using the AC adapter, perform any operation
such as zooming.
NATURAL : Reproduces natural tones of a subject.
[VIVID] : Enhances the color of images.
Connect the AC adapter.
EXECUTE : Performs this function. Select [OK] when
completed.
[CANCEL] : Cancels this function.
NOTE
Depending on the condition of the HDD, it may take several
minutes for the cleanup process to be completed.
EXECUTE : Performs this function. Select [OK] when
completed.
[CANCEL] : Cancels this function.
NOTES
Be aware that all fi les and data including protected fi les
will be erased by the formatting process.
Do not format the recording medium on your PC.
Connect the AC adapter.
EXECUTE : Performs this function. Select [OK] when
completed.
[CANCEL] : Cancels this function.
EXECUTE : Performs this function. Select [OK] when
completed.
[CANCEL] : Cancels this function.
NOTES
Be aware that all fi les and data including protected fi les
will be erased by the formatting process.
Do not format the recording medium on your PC.
EXECUTE : Performs this function. Select [OK] when
completed.
[CANCEL] : Cancels this function.

Publicité

Table des Matières
loading

Table des Matières