Step 3 : Connecting To The Network; Step 4 : Connecting The Ac Mains Lead - Panasonic DMP-BBT01 Mode D'emploi De Base

STEP 3 : Connecting to the network

The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated
≥ You can enjoy BD-Live
≥ You can enjoy VIERA Connect
≥ You can access other devices (Home Network)
≥ This unit supports Wi-Fi Direct
router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Wi-Fi Direct
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
This unit can be connected to a wireless router wirelessly.
≥ For up-to-date compatibility information on your wireless router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
≥ See page 12 for the precautions for wireless LAN connection.
LAN cable connection
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

STEP 4 : Connecting the AC mains lead

≥ This unit consumes a small amount of AC power (
power conservation, if you are not planning to use the unit for an extended period of time, please
disconnect the AC mains lead from the household mains socket.
≥ The unit is in the standby condition (Standby/on LED lights red) (
connected. The primary circuit is always "live" as long as the AC adaptor is connected to an electrical
outlet.
≥ Do not use any other AC adaptors except the supplied one.
and can make a wireless connection to wireless devices without
TM
.
TM
Wireless router, etc.
LAN Cable
Broadband router, etc.
AC adaptor (supplied)
AC mains lead (supplied)
To a household mains socket
12) even when turned off. In the interest of
10) when the AC mains lead is
Internet
Internet
9
VQT3W11 (9)