Specifications; Precautions For Wireless Lan Connection - Panasonic DMP-BBT01 Mode D'emploi De Base

Specifications

Specifications are subject to change without
notice.
Signal system
Operating temperature
range
Operating humidity
range
Digital audio output
HDMI AV output
SD card slot
USB slot
Ethernet
Wireless LAN
LASER Specification
Power supply
Power consumption*
Power consumption in
standby mode*
Power consumption in
quick start standby
mode*
AC Adaptor
Dimensions (WkHkD)
Horizontal installation
with no pedestal
Dimensions (WkHkD)
Horizontal diagonal
installation with
pedestal
Mass
Mass
Including pedestal
* Using supplied AC adaptor
≥ Product Identification Marking is located on the bottom of
the main unit and AC adaptor respectively.
≥ This unit supports "HDAVI Control 5" function.
12
(12) VQT3W11
PAL/NTSC
i5 oC to i35 oC
10 % to 80 % RH (no
condensation)
Optical digital output (Optical
terminal)
Output connector: Type A
(19 pin) 1 system
1 system
USB2.0
1 system
10BASE-T/100BASE-TX
1 system
Standard Compliance:
IEEE802.11 b/g/n
Frequency range: 2.4 GHz
band
Security: WPA /WPA2
TM TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
Class 1 LASER Product
Wave length: 790 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the
safety protection
DC 12 V (DC IN terminal)
Approx. 8.9 W
Approx. 0.5 W
Approx. 4 W
Power source: 100 to 240 V,
50/60 Hz
Power consumption: 42 W
DC output: DC 12 V 2500 mA
179 mmk27 mmk180 mm
≥ Including the projecting parts
253 mmk95 mmk250 mm
≥ Including the projecting parts
Approx. 0.9 kg
Approx. 1.0 kg
Precautions for wireless
LAN connection
The following limits are in place regarding the
usage of this unit. You must be aware of these
limits before using this unit.
Panasonic will in no way be responsible for any
incidental damage which may arise due to a
failure to obey these limits, or to any condition of
use or disuse of this unit.
≥ Data transmitted and received over radio
waves may be intercepted and monitored.
≥ This unit contains delicate electronic
components.
Please use this unit in the manner in which it
was intended and follow the following points:
– Do not expose this unit to high temperatures
or direct sunlight.
– Do not bend, or subject this unit to strong
impacts.
– Keep this unit away from moisture.
– Do not disassemble or alter this unit in any
way.
Declaration of Conformity (DoC)
Hereby, "Panasonic Corporation" declares that this product
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact in the EU: Panasonic Services Europe, a Division of
Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 15, 22525
Hamburg, Germany
This product is intended to be used in the following
countries.
Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary,
Ireland, Italy, Iceland, Liechtenstein, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, United Kingdom, Switzerland
This product is intended for general consumer. (Category 3)
The WLAN feature of this product shall exclusively be used
inside buildings.
This product on purpose to connect to access point of
2.4 GHz WLAN.