Cleaning, Maintenance And Ordering Of Spare Parts; Disposal And Recycling - EINHELL TH-CD 12 Li Mode D'emploi D'origine

6.8 Magnetic screw holder (Fig. 4/Item 9)
Screws can be placed on the magnetic screw hol-
der for easy reach during operation.
7. Cleaning, maintenance and
ordering of spare parts
Always pull out the mains power plug before star-
ting any cleaning work.
7.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
tly.
pressure.
r-
•
We recommend that you clean the device
o
immediately each time you have finished
be
using it.
.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
cleaning agents or solvents; these could at-
tack the plastic parts of the equipment. Ensu-
re that no water can seep into the device. The
h
ingress of water into an electric tool increases
the risk of an electric shock.
7.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
rk
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
gh
•
Article number of the machine
•
Identification number of the machine
r
•
Replacement part number of the part required
For our latest prices and information please go to
the
www.isc-gmbh.info
.
e
ure
as
as
Anl_TH_CD_12_Li_SPK1.indb 19 Anl_TH_CD_12_Li_SPK1.indb 19
GB

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempe-
rature is between 5 and 30 °C. Store the electric
tool in its original packaging.
- 19 -
19.09.13 16:35 19.09.13 16:35