Ceado B180 Manuel D'utilisation page 17

GB
14. Do not use the appliance if it is damaged or had any loosened parts
such as blades, couplings, etc. In these cases, contact an
Authorized Service Center immediately.
15. WARNING: BLADES ARE SHARP . HANDLE WITH CARE!
To consult these instructions on-line, visit the site www.ceado.com
INSTALLATION
Comply with the safety recommendations indicated above and hereafter when installing the
appliance.
1. Make sure that the mains voltage is as indicated on the rating label of the appliance and that
the electric system is grounded and equipped with a differential switch.
2. Install the appliance in a DRY, PROTECTED place, far from water sprays or splashes, heat
sources, open flames and inflammable substances.
Place the blender on a flat, horizontal, stable surface where it cannot tip over.
3. Make sure the switch on the appliance is in the "OFF" position and plug it into a socket
protected by a magneto thermal switch or fuses.
Do not use a multiple outlet plug.
4. Stretch the power cable out to full length. Do not let it pass over sharp edges or hot surfaces.
Do not let oil spill on it. Do not let the power cable hang loose from the counter on which the
blender stands.
SAVE THESE INSTRUCTIONS!
17