Product Overview; Before Initial Use; Charging Up The Battery - DS Produkte MG85-401 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Product Overview

Charge level
indicator (fake fi re)
Charger

Before Initial Use

1. Unpack all parts and check the items supplied to make sure they are complete (see the
"Items Supplied" chapter); also check for transport damage. If you fi nd any damage to the
components, do not use them (!), but contact our customer service.
2. Charge up the battery fully (see the "Charging up the Battery" chapter).

Charging up the Battery

Charge up the battery fully before you fi rst use the product in order to achieve
the maximum charging capacity. The fi rst charge will last for approx. 2 hours. Each
further charge will last between 1 and 2 hours.
The USB adapter can also be used to charge the battery up directly on a computer.
The battery can be charged up to 300 times.
1. If necessary, unscrew the battery from the atomizer.
2. Screw the battery into the USB adapter.
3. Plug the USB adapter into the USB port of the charger.
Battery
Atomizer
Port for the
USB adapter
Cartridge
(mouthpiece)
USB
adapter
Control
lamp
Port for the
battery
17

Publicité

Table des Matières
loading

Table des Matières