Turning Power On/Off - Sharp PN-C703B Manuel D'installation

Caution
• When all connections are complete, turn on the power.
• Turn on the monitor first before turning on the computer or
playback device.
• Even when the power is turned off with the POWER button
on the monitor, a minute amount of power is consumed if
the power cord is connected.

Turning power on/off

1. Press the POWER button on the side of the monitor to
turn on the power.
The power LED lights green.
Remote control sensor
Status
Off Power off
Green lit Power on
Red lit Standby mode
2. Turn the power on and off with the POWER button on
the remote control.
Point the remote control unit toward the remote control
sensor on the monitor, and press the POWER button.
Caution
• When turning the power off and back on, always wait for at
least 5 seconds. A short interval may result in a malfunction.
Turning Power On/Off
Power LED
Status of the monitor
7
E