General Maintenance - Flexlite FLX3SA Manuel D'utilisateur

OPERATION
Use the switch in front of plastic box to turn on/off the light.
MAINTENANCE
WARNING:
When servicing use only identical FLEXLITE replacement parts. Use of any other parts may create hazards or
cause product damage.
Always wear safety goggles or safety glasses with side shields when using compressed air to clean worklights. If
operation is dusty, also wear a dust mask.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial
solvents and may be damaged by their use. Use clean cloth to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with
plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
FAN AND /OR HEATSINK MAINTENANCE
 Some models are made with an integrate cooling fan. Designed to resist rain and dust. This fan and air flow heatsink
must be clean frequently to perform. Use only a low air pressure gun to clean and remove any dust. Don't use solvent,
soap or cleaner. The unit is clean when you can see across the heatsink.
WARNING:
Do not immerse in water.
4