Blomberg BRFB1812SSL Manuel D'utilisation page 26

Masquer les pouces Voir aussi pour BRFB1812SSL:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• The room temperature may be high. >>> The product will normally run
for long periods in higher room temperature.
• The product may have been recently plugged in or a new food item is
placed inside. >>> The product will take longer to reach the set tem-
perature when recently plugged in or a new food item is placed inside.
This is normal.
• Large quantities of hot food may have been recently placed into the
product. >>> Do not place hot food into the product.
• The doors were opened frequently or kept open for long periods. >>>
The warm air moving inside will cause the product to run longer. Do
not open the doors too frequently.
• The freezer or cooler door may be ajar. >>> Check that the doors are
fully closed.
• The product may be set to temperature too low. >>> Set the tempera-
ture to a higher degree and wait for the product to reach the adjusted
temperature.
• The cooler or freezer door washer may be dirty, worn out, broken or
not properly settled. >>> Clean or replace the washer. Damaged / torn
door washer will cause the product to run for longer periods to pre-
serve the current temperature.
The freezer temperature is very low, but the cooler temperature is
adequate.
• The freezer compartment temperature is set to a very low degree.
>>> Set the freezer compartment temperature to a higher degree and
check again.
The cooler temperature is very low, but the freezer temperature is
adequate.
• The cooler compartment temperature is set to a very low degree. >>>
Set the freezer compartment temperature to a higher degree and
check again.
The food items kept in cooler compartment drawers are frozen.
• The cooler compartment temperature is set to a very low degree. >>>
Set the freezer compartment temperature to a higher degree and
check again.
The temperature in the cooler or the freezer is too high.
• The cooler compartment temperature is set to a very high degree. >>>
Temperature setting of the cooler compartment has an effect on the
temperature in the freezer compartment. Wait until the temperature
of relevant parts reach the sufficient level by changing the temperatu-
re of cooler or freezer compartments.
• The doors were opened frequently or kept open for long periods. >>>
Do not open the doors too frequently.
• The door may be ajar. >>> Fully close the door.
25
EN

Publicité

Table des Matières
loading

Table des Matières