Alarm Mode - Franklin Chef FCW100 Mode D'emploi

Operating the Internal Lights
Each compartment has an internal light to make is easier for you to see the wines that you have
stored. To turn these lights on or off, simply use the ON/OFF button located on the left side of the
control panel.
Compressor Run Indicator
When your unit is running, the control panel will display a moving icon representing a running fan.
If the compressor stops running, the icon will stop running as well.
If There's a Power Loss
If the unit suffers a power outage or any other power cutoff, the temperature setting will revert to
the default value (55 degrees Fahrenheit) after power is returned.
About the Liquid Crystal Display (LCD)
When you press any key, a backlight will appear in the Display Panel. If no other key is pressed,
the backlight will automatically go out after 2 minutes.
In the event that there is a fault in the unit, an ALARM indication will appear at the left side of the
screen.

ALARM MODE

In ALARM mode, the unit will make a beeping sound and display an alarm message.
If the Liquid Crystal Display (LCD) on the control panel displays any of the following symbols: E,
L or H, consult the Wine Cellar Troubleshooting section of this manual.
Shelving
The shelves in your unit are chrome-plated so they will not rust. These shelves pull out only 1/3
of the way. This is a safety features so that neither the unit nor the shelves will tip over.
6