Gaggenau RF 411 Guide D'utilisation page 9

Controls
POWER Button ÿ
A
Serves to switch the whole appliance On and
Off.
B
ICE Button Ü
Serves to switch the Ice Maker On and Off.
See chapter "Ice Maker".
ALARM Button ±
C
Serves to switch the warning signal Off.
See chapter "Alarm function".
D
SUPER Button ³
Serves to switch the Super Freezing On and
Off.
See chapter "Super Freezing"
E Display Panel
The temperature in the Freezer Compartment
is shown in the Display Panel. Activated
special functions are shown via "symbol".
The menus and setting options which are
available are represented on the Display Panel
in the Setup Mode. See chapter "Special
Functions".
Selection Buttons ¾ ¿
F
The temperature setting is activated using
the Selection Buttons, see chapter "Setting
the Temperature".
For selecting a menu in the Setup Mode,
see chapter "Special Functions", section
"Setup Mode".
Setting Buttons @/A
G
The temperature can be changed using
the Setting Buttons, see chapter "Setting
the Temperature".
More settings can be selected in the Setup
Mode, see chapter "Special Functions".
SETUP Button μ
H
This button starts and ends the Setup Mode.
If the Setup Mode is ended using
the SETUP Button, the changes that have
been made are stored.
VACATION Button ¶
I
This button is used to switch Vacation Mode
On and Off, see chapter "Special Functions",
section "Vacation Mode".
Note:
A sound can be heard every time a button is pushed
if this function is selected in the "Sound" menu during
the Setup Mode.
Symbols in the Display Field
Super Freezing is active (see chapter
"Super Freezing").
Vacation Mode is active (see chapter
"Special Functions").
For the setting options in the Setup
Mode (see chapter "Special Functions").
A warning message is displayed
(see chapter "Alarm function").
Ice Maker is switched on (see chapter
"Ice Maker").
Signal to the Water Filter is displayed
(see chapter "Water Filter").
9