Rain Cover; Removing Seat - Quinny Zapp 01274 Mode D'emploi

To Use
11
Removing the
Wheels
Press the release button
and pull the rear wheel
out of the frame (Figure
11).
WARNING –
SUFFOCATION HAZARD
• Be sure rain shield doesn't cover the child's face.
12

Rain Cover

Place the rain cover over the canopy and secure
adhesive straps around the handles. Hook it under the
footrest (Figure 12).
12
11
Press the release button
on the bottom of each
front wheel and pull
wheel off of the frame
(Figure 11a).
13

Removing Seat

It is necessary to remove
the seat from the frame
when preparing to use
the car seat adapters.
Unzip seat zipper at the
back of the seat (Figure
13).
To unclip the seat from
the frame, (Figure 13a)
fold stroller enough to
relieve the tension on
the clips. See steps 10-
10d.
7
TM
11a
13
13a
Clip