Speaker Setting; Switching Display - Kenwood KDC-MP222 Mode D'emploi

5
Exit Audio Control mode
Press the [AUD] button.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.

Switching Display

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
Display
"SP OFF"
"SP 5/4inch"
"SP 6*9/6inch"
"SP O.E.M."
— 11 —
In Tuner source
Information
Station name or Frequency
Frequency
Clock
In CD & External disc source
Information
Disc title
Track title
Play time & Track number
Disc name
Clock
In MP3 source
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Play time & Track number
Disc name
Clock
In Auxiliary input source
Information
Auxiliary input name
Clock
If the Disc title, Track title, Song title & Artist name, or Album name
& Artist name is selected when the disc which does not have Disc
title, Track title, Song title, Album name, or Artist name is played,
track number and play time are displayed.
Display
"SNPS"
"BAND+FREQ"
Display
"D-TITLE"
"T-TITLE"
"P-Time"
"DNPS"
Display
"TITLE"
"ALBUM"
"FOLDER NAME"
"FILE NAME"
"P-Time"
"DNPS"