Description; Design; Function - Signode JOSEF KIHLBERG JK20A670L Mode D'emploi

4
1
5
6
Fig. 1
05.20

DESCRIPTION

1 Door
2 Single fire button
3 Trigger
4 Magazine lid
5 Compressed air connection
6 Speed adjustment
4
3
2
Stapler JK20A670L has both single shot and continu-
ous firing without safety yoke.
1. Single shot firing:
2. Continuous firing:
3. Speed of continuous firing:

4.1 DESIGN

4.2 FUNCTION

Never fire staples into the air!
Press the single fire button (Fig. 1/2) on the left
side above the trigger and a single shot will be
fired when the trigger is activated.
Release the single fire button (1/2) on the left
hand side and continuous firing will occur for as
long as the trigger (1/3) is activated.
The firing speed is regulated by the speed adjust-
ment knob (1/6) on the right side. Turning counter
clockwise will increase the speed (max. 28 shots/
sec) at 7 bars (100 psi); turning clockwise reduces
the speed.
Warning: before stapling ensure that
your hand or any other part of your
body is not underneath the nozzle.
Josef Kihlberg JK20A670L
5