Transport And Storage; Adjusting The Harness - Husqvarna 360BT Manuel D'utilisation

Transport and storage

• Store and transport the machine and fuel so that there
is no risk of any leakage or fumes coming into contact
with sparks or open flames, for example, from
electrical machinery, electric motors, electrical relays/
switches or boilers.
• When storing and transporting fuel always use
approved containers intended for this purpose.
• When storing the machine for long periods the fuel
tank must be emptied. Contact your local gas station
to find out where to dispose of excess fuel. Empty the
fuel tank and press the primer until all fuel has been
emptied. Remove the spark plug and drop a spoon of
2-stroke oil in the cylinder. Turn over the engine a few
times and then put the spark plug back in place.
• Ensure the machine is cleaned and that a complete
service is carried out before long-term storage.
• Secure the machine during transport.
• Store the machine in a dry, cool, well-aired and dust-
free location. Store the machine out of reach of
children.
WARNING! Take care when handling fuel.
!
Bear in mind the risk of fire, explosion
and inhaling fumes.

Adjusting the harness

WARNING! The harness must always be
!
worn when working with the machine.
Failure to do so means you will be unable
to manoeuvre safely and this can result
in injury to yourself or others.
A correctly adjusted harness and machine significantly
facilitates the work. Adjust the harness to give the best
working position.
1158220-49 Rev. 1 2016-04-08
GENERAL SAFETY PRECAUTIONS
Tighten the side straps so that the pressure is evenly
distributed across the shoulders.
Tighten and adjust the breast belt for the best working
position.
–
English 7