Facom NJ.3000F Notice Originale page 6

PLACING THE MACHINE IN SERVICE
Always use an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
Model Square Impact
drive
''
NJ.3000F 3/8 1750
NS.2000F 1/2 1750
Model Free speed
rpm
NJ.3000F 10500
NS.2000F 10500
* k = measurement uncertainty in dB
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE PRODUCT
NJ.3000F – FACOM 3/8" AIR IMPACT WRENCH , NS.2000F – FACOM 1/2" AIR IMPACT WRENCH
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN 792-6 :2000 +A1:2008, EN ISO 14121-1:2007
BS EN ISO 12100-1:2003+A1:2009
BS EN ISO 12100-2:2003+A1:2009
EN ISO 15744:2008
EN 28662-1:1993 &BS EN ISO 28927-2:2009
LUBRIFICATION
• BEFORE EACH OPERATION, CHECK:
- Only use suitable FACOM sockets and flogging spanner accessories, (''IMPACT'') as well as
safety devices, bush and pin for mounting one of these cases on a drilled driving
square.
- The drive square condition (no marks, cracks or excessive wear).
- The condition of the safety devices (bush and pin) on the drilled square as well as the draw
bead on the non-drilled square.
Maximum
rate dynamic
Pressure dB(A)
torque
N.m
710 93,8
800 93,8
Air consumption
l/min
125
125
** k = measurement uncertainty in m/s²
CE DECLARATION OF CONFORMITY
Noise level
Power dB(A)
k* k*
1,5 104,8 1,5
1,5 104,8 1,5
Working pressure Weight
bar kg
6,2 1,3
6,2 1,4
EMERGENCY
GATE VALVE
Vibrations
Pressure dB(C)
k*
99,5 1,5 3,06
99,5 1,5 3,06
Dimensions
mm
152x67x181
157x67x181
F
ACOM QUALITY MANAGER
level
m/s
2
k**
0,79
0,79
25.09.2011