Publicité
Les langues disponibles
Les langues disponibles
3
Attach the Upper Leg Supports to the cart assembly by slipping the ends of the tubes into the ends of the legs. Secure the
Upper Leg Supports with 4 each, 1/4-20x3/4" Machine Screws.
1/4-20x3/4"
Machine screw
Qty. 4
4
With aid of a helper, turn the Cart Assembly over and allow it to rest on the Upper Leg Supports.
Insert a Cotter Pin into one end of the Axle Rod. Then slip an Axle Washer onto the Axle Rod, Followed by one of the Wheels.
Next, insert the Axle Rod through both RH leg Tubes. Install the remaining Wheel, Axle Washer and Cotter Pin.
Cotter Pin
RH Leg Tubes
Cotter Pin
Axle Washer
1/4-20x3/4"
Machine Screw
Axle Rod
Upper Leg Support
Cotter Pin
Wheel
Qty. 2
Axle Washer
Qty. 2
Axle Washer
Page 9
Publicité
