Philips HTB3524/F7 Manuel D'utilisation page 29

4 4 4 4
LAN
1
Using a network cable, connect the LAN
connector on your home theater to the
network router.
2
Press (Home).
3
Select [Setup], and then press OK.
4
Select [Network] > [Network
installation] > [Wired (Ethernet)].
5
Follow the onscreen instructions to
complete the setup.
• If connection fails, select [Retry], and
then press OK.
6
Select [Finish], and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View
network settings].
Set up the wireless network
Your home theater has built-in Wi-Fi for easy
access to the wireless network.
What you need
• A network router (with DHCP enabled).
For best wireless performance, coverage,
and compatibility, use 802.11n router.
HTB3524 _F7_UM_V2.0.indb 9
LAN
LAN
1
Press
2
Select [Setup], and then press OK.
3
Select [Network] > [Network
installation] > [Wireless (Wi-Fi)], and
then press OK.
4
Follow the onscreen instructions to select
and set up the wireless network.
•
5
Select [Finish], and then press OK to exit.
•
Personalize the network name
Name your home theater to easily identify it on
your home network.
1
Press
2
Select [Setup], and then press OK.
3
Select [Network] > [Name your
Product:].
4
Press the Alphanumeric buttons to enter
the name.
5
Select [Done], and then press OK to exit.
(Home).
If connection fails, select [Retry], and
then press OK.
To view the network settings, select
[Setup] > [Network] > [View
wireless settings].
(Home).
EN
9
3/11/2014 1:59:26 PM