Casselin CMSV35 Mode D'emploi page 17

Place the mouth of the bag against the lower plate, close the upper jaw and apply a slight pressure on it
during aspiration after activating the aspiration function using the empty activation key. Once the air has
been evacuated, press the seal button.
Repeated pressing of the vacuum key blocks all activities of the wrapper.
After use, let the device cool down.
Approximate vacuuming time:
 Small container: about 30 seconds
 Medium container: about 40 seconds
 Large container: approximately 50 seconds
It is important to respect the filling level of the bags
In operation, the resistance can cause burns. Always let the jaws close during the welding cycle.
Always unplug the appliance when the appliance is not in use.
NOTEThe device is fitted with a safety system in the event of overheating. If tripped, unplug the device and
allow it to cool. If this protection system operates regularly, it is imperative to contact your dealer.
After automatic shutdown, the device can only be put into service by pressing the Reset button on the back
of the device, wait for the temperature to drop, press the Reset button.
Display
activation
Empty
EN
Light switch
main
Welding
activation