IKUSI ONE 118 Manuel D'utilisation page 42

Equipment installation and configuration
Self-installation
NoTE
TheJequipmentJautomaticallyJconfiguresJtheJoptimumJoperatingJfrequencyJandJ
gainJofJtheJUHFJfilters.JThe equipment does not automatically configure the
output level of general (band) gains.JThisJisJbecauseJtheJoutputJlevelJmustJbeJ
setJbyJtheJinstallerJtoJsuitJtheJnetworkJyouJareJfeeding.
1) InJtheJmainJmenu,JlocateJandJselectJ
AUTOINSTALL.
a)J IfJNOJisJselected:JyouJwillJreturnJtoJtheJ
mainJmenu.
b)J IfJYESJisJselected:Jself-installationJwillJ
begin..
NoTE
TheJequipmentJdisplaysJinformationJonJ
theJstatusJofJself-installation.JPleaseJ
waitJaJfewJsecondsJuntilJitJisJcompletedJ
andJAUTOINSTALL COMPLETEDJisJ
displayed.
2) SelectJOKJtoJcompleteJself-installation.JTheJ
unitJwillJnowJshowJyouJtheJgeneralJ(band)JgainJ
settingsJforJadjustment.
3)
ToJchangeJtheJoutputJlevelJofJgeneralJgains,J
see:JGeneral gain adjustmentJsectionJonJpageJ
40.
4) ToJreviewJtheJallocationJofJfiltersJtoJaerials,Jsee:J
Allocation of filters to
38.
42
/ Self-installation
aerialsJsectionJonJPageJ