Sewosy CARE-IN KVA1 Mode D'emploi page 39

6 There are 3 methods to add the network device. Select one of them as described below:
6.1 By using the LAN Search

Select your device in the list (the number is
visible from the rear of your Care‐in BOX)
‐ Rename your device if you want
‐ Check that the GID number matches the
number of your device
‐ Enter connection information (default user
name is "admin" and default password is
"1234")
‐ Click "OK" on the right top corner of the
screen
6.2 By using the QR Code Scan

Scan the QR Code on the rear of your Care‐in
BOX
The application integrates already the QR
code reader, you just have to grant it's access
‐ Rename your device if you want
‐ Check that the GID number matches the
number of your device
‐ Enter connection information (default user
name is "admin" and default password is
"1234")
‐ Click "OK" on the right top corner of the
screen
6.3 By manually input

‐ Rename your device if you want
‐ Enter the GID number of your device (the
number is visible from the rear of your Care‐
in BOX)
‐ Enter connection information (default user
name is "admin" and default password is
"1234")
‐ Click "OK" on the right top corner of the
screen
Care‐in BOX
Care‐in BOX
Care‐in BOX
26