Scope Of Delivery; Safety Remarks - HEBU medical TITANIUM II HB 8884-A Mode D'emploi Et De Service

Oscillo-Saw TITANIUM II

1 Scope of delivery

HB 8884 HEBU oscillating cast cutting saw TITANIUM II
HB 8895-03 Circular saw blade TITANIUM, dia. 50 mm
HB 8896-03 Circular saw blade TITANIUM, dia. 65 mm
E 8894-01 2x fork wrenches
Operating instructions

2 Safety remarks

Our products are exclusively intended for professional use by appropriately trained and qualified
personnel and may only be acquired by them.
All safety remarks in these operating instructions are marked with the symbol
Before using the saw, carefully read through these operating instructions and the
!
valid national occupational safety regulations and act accordingly.
Please keep these operating instructions for later reference and always include them if the
device is sold or passed on to third parties.
!
Application in accordance with the intended application:
This device is intended for sawing open plaster casts.
!
Never rivet or screw signs or symbols onto the device, as this can render the
protective insulation ineffective. We recommend using adhesive signs.
!
Only ever use undamaged plugs and cables.
Check cables and plugs regularly.
!
The mains voltage and specified voltage rating shown at the device must be in
agreement.
!
Only ever use original accessories.
!
Wear personal protective gear such as protective goggles,
ear protectors and gloves.
!
The device must not be operated in areas at risk from explosion.
!
Any serious incident that has occurred in relation to the device should be reported
to the manufacturer and the competent authority of the Member State in which the
user and/or patient is established.
EN
!
.
17